Anbefalet afisoleringslængde (DR50-varianter): 31 mm

5 mm – 5 mm (peeling/stripping capacity)

Used for removing solder from a solder joint using heat and vacuum

Installation notes from the manufacturer indicate that the marker should be separated from metal objects and that at least 15 cm of soil should be hand-filled over the marker to prevent movement during backfill

Product: 3M Cold Shrink End Cap EC-4

Prøveclips SKPS-4 blå MIL4920121111 Anbefalet afisoleringslængde (DR50-varianter): 31 mm. With flexible shaft and spring wire grabber (stainless steel) for a good contact to pins and wires in inaccessible places. Especially suitable for measuring voltages. The shaft is silicone insulated and guarantees good heat resistance and flexibility even at low temperatures. 4 mm rigid socket in handle accepting spring loaded 4 mm plugs with rigid insulating sleeve.